Sunday, April 15, 2018

Teacup Cactus Pincushion

 Hello!  I'm making an effort to actually get more than one blog post in during the month of April.  It actually wasn't too hard since all I had to do was edit a few photos that I had already taken.  I'm excited to share this fun tutorial with you today.  I've wanted to turn one of my vintage teacups into a pincushion for quite sometime but I had been seeing some adorable succulent and cactus pincushions lately that really caught my eye.  Then I had the brilliant thought to combine the two and I love how it turned out.
If you have been following my blog for awhile you may remember this post about planting succulents in teacups (so this is my first time at the teacup succulent rodeo ha ha).  For this project I decided to use my favorite blush pink and gold teacup and saucer that a friend gave me several years ago.  It goes great in my sewing studio as I have a bunch of blush pink accents in the space.  I started by gluing my teacup to the saucer with hot glue.  Next I measured how tall I wanted my succulent to be and found a circular object that was close in diameter to that measurement.  Then I grabbed a piece of green felt and drew 6 circles on the felt.
Next I cut out the felt circles with pinking shears.
Then I placed two circles together and sewed around the edge leaving about 2-3 inches open at the bottom.  I repeated this step with the other 4 circles.  I used my sewing machine for this step but you could hand sew them too.
Next I stacked the 3 sewn pieces on top of each other and hand stitched a straight line down the middle of the stack.  Make sure all of the open parts of each piece are lined up with each other before you sew them together.


Next I filled the cactus with steel wool (you could also use filler that you would use for stuffed animals but I thought the steel wool would help to keep the pins sharp).
Finally I found some black felt and cut a strip and cut it like grass for a kids art project (does that make sense...my baby/mommy brain can't seem to think of better words to describe that today).  I placed a little dot of hot glue on one end and rolled it up and placed another dot of hot glue on the other end to make the center of the flower.  I apologize that I didn't take a picture of that step.

Then I freehanded the flower and cut out two pieces from pink felt.

When I glued the flower pieces to the cactus I placed the top piece so that the petals lined up with spaces between the petals of the bottom piece.  Finally I glued the stamen piece in the center of the flower.

The final step was just to add the pins.  I think it is so cute and love having the saucer underneath to hold little items like small safety pins, a few of my labels for my Etsy shop items, and my little embroidery scissors.  


Next time I write a post I will be very excited to share my sewing studio and my giant pegboard with you.  It is quickly becoming one of my favorite spaces in this house!  

Tuesday, April 10, 2018

Sewing for Baby: Booties, Bibs, and Blankets




Man life has been busy.  It seems that I can only manage a post or 2 every month.  I've been busy with many projects lately but I haven't had much time for blogging about them!  Today I've managed to find some time to write another post in the Sewing for Baby series that I started back when my oldest daughter was a baby.  I have not one but three fun sewing projects to share with you today!  First up is my favorite thing to make lately: baby booties and shoes.  The pattern that I used for all of the examples in today's post is Maggie's Stay-on Baby Booties by Beautiful Pie Shop.  I've had this pattern for a long time but never tried it until a friend wanted some stay on type shoes for her daughter.  

I made my first pair for her using gray fleece and flannel lining.  I love this pattern so much.  It is easy to follow and they are really fun to make.  Plus they really do stay on!  I love them for my youngest because socks never stay on her feet and she is always pulling her carseat cover off of her feet.  I no longer worry about her little feet freezing!  I love making them so much that I now carry them in my Etsy shop The Petite Seam.  They can even be made without the cuff which you will see in a few of the photos below.








And here is my sweet baby girl modeling them in her 5 month photos (she is over 6 months now!)

 The next project is one that I have yet to make more of but I plan to make a lot more of them.  I hope to list them as a new item in my Etsy shop soon but so far I've only made one as a gift for a friend.


I used this tutorial for rounded pom pom bibs from the blog Life on Waller.  I didn't follow the tutorial to a T however because I hate hand stitching so left a small opening, flipped it right side out, then topstitched the entire bib.  I think topstitching makes it look more finished anyway.  The blog also has a tutorial for a fringe bib which I'm going to try next.

My final (or maybe not *wink wink*) project for today's post is a taggy blanket.
This little blanket was so easy to make.  I found some wooden teethers on Amazon but there are also some great ones on Etsy.  I cut a piece of cotton fabric and a piece of minky 17" by 17".  Then I cut a bunch of different pieces of ribbon about 4" each (it was around 32 pieces).  Just make sure you use ribbons with varying textures to make it interesting for baby to play with.   I wish I would of taken a picture of this step but I just folded each piece of ribbon in half and pinned the ends of the ribbon pieces to the right side of the cotton fabric.  For the wooden teether I just cut a slightly longer piece of ribbon and tied it around the teether and pinned that ribbon to one of the corners of the cotton fabric. Then I pinned the cotton and minky right sides together.  I sewed around the edge with a 3/8 inch seam allowance making sure to leave a roughly 2 inch opening. Then I flipped the blanket right side out, pressed, and pinned the opening shut.  Finally I topstitched around the entire blanket.
The watercolor blanket was a part of a baby gift for a friend but I also made one for my baby to go in her Easter basket.  I forgot to take a picture after it was done.  If you look closely you can see the pins in this one because it still needs to be topstiched.  Also that pacifier clip will be a future blog post :).

Finally I have a few more things to share with you that kept me busy at my sewing machine in February.  You may remember that I recovered the glider cushions in my daughter Lyla's nursery (I'm using the same glider in Ana's room now).  You can read more about that here.  Recently my friend asked me to make slipcovers for the glider in her daughter's nursery.  I love how this glider turned out.  The cushions before were a light green.


 I also made a few changing pad covers for her.  You can read more about those in this other Sewing for Baby series post.

Also how amazing is that mid mod dresser that they painted teal!

This isn't all that I've been busy with of course.  I have also been working on a couple of more sewing projects related to cloth diapers that I will share in a future post that will also include an update on our cloth diapering experience.  As far as home improvement projects go I've taken my focus downstairs with our family room and my sewing studio getting paint jobs and some other exciting projects in the sewing studio which I will give you a hint at in this picture.
I will give you a tutorial on how to make that cute cactus teacup pincushion that you see next to my sewing machine in my next post!












Related Posts Plugin for WordPress, Blogger...